Convoluted Rubber Air Spring GF400/215-2 Rubber Air Bellows For Equipment Shock Absorption

جزئیات محصول:

محل منبع:	گوانگدونگ ، چین
نام تجاری:	GUOMAT
گواهی:	ISO/TS16949:2009
شماره مدل:	GF400/215-2

پرداخت:

مقدار حداقل تعداد سفارش:	6 عدد
قیمت:	$99.9-129.9/pc
جزئیات بسته بندی:	جعبه کارتن قوی یا همانطور که مشتریان نیاز دارند
زمان تحویل:	2-8 روز کاری
شرایط پرداخت:	L/C ، T/T ، Western Union
قابلیت ارائه:	1000 قطعه در هفته

مخاطب

توضیحات محصول جزئیات

مدل شماره.:	GF400/215-2	ماده بهاری:	لاستیک
کیفیت:	100 ٪ آزمایش شده است	محفوظ:	شوک را کاهش دهید
بسته حمل و نقل:	کارتن های قوی	سرویس پس از فروش:	12 ماه
پیچش:	2	رنگ:	سیاه

Convoluted Rubber Air Spring GF400/215-2 Rubber Air Bellows For Equipment Shock Absorption

Technical parameters

Rubber Bellows MAX Diameter: 262 mm

Rubber Bellows Natural Diameter: 225 mm / 8.88 inches

The Working Stroke: MAX 325mm to MIN 81 mm

Maximum Height: 325 mm

Minimum Height: 81 mm / 3.12 inches

Stroke Height: 224 mm

Key Advantages of Air Springs

Adjustable Stiffness: By varying the internal air pressure, the suspension's firmness or softness can be flexibly adjusted to suit varying loads and field conditions.
Non-Linear Stiffness: Its stiffness varies with travel, providing soft, comfortable filtering of small vibrations and strong support during large impacts.
Long Life: Compared to traditional leaf springs, air springs offer longer fatigue life and lower maintenance costs.
Lightweight: They contribute to overall vehicle weight reduction.

Installing the GF400/215-2 Air Spring on a Lifting Platform

Before installing the GF400/215-2 air spring bellows, ensure that the lifting platform is completely de-energized and securely supported by mechanical struts. This is the most important safety precaution. During installation, first bleed the air from the old bellows, disconnect its air intake line, and remove the center bolt or flange bolts to remove the old bellows. Next, thoroughly clean the upper and lower mounting surfaces to ensure they are free of debris. Then, accurately center the new bellows and place them in position. Manually pre-tighten all bolts. Finally, use a torque wrench to tighten all bolts in a diagonal pattern to the manufacturer's specified torque value. After installation, connect the air line and perform a low-speed inflation test. Use soapy water to check all connections for leaks. Perform several complete lifting and lowering cycles to verify smooth and stable operation, with no unusual distortion or noise.

Other types GF-Air Spring

Model Size	Design size(D_O mm)	The largest diameter( mm)	The end diameter(φo mm)	Design height(H mm )	Convolutions number(N)
GF40/60-1	40	80	80	60	1
GF80/58-1	80	120	110	58	1
GF100/140-2	100	150	145	140	2
GF100/166-2	100	160	160	176	2
GF100/238-3	100	160	160	256	3
GF120/102-1	120	180	180	102	1
GF150/206-2	150	230	220	216	2
GF150/298-3	150	230	220	316	3
GF200/206-2	200	280	280	218	2
GF200/298-3	200	280	280	320	3
GF230/206-2	230	310	310	218	2
GF230/298-3	230	310	310	320	3
GF250/206-2	250	330	330	218	2
GF250/298-3	250	330	330	320	3
GF280/206-2	280	360	360	218	2
GF280/298-3	280	360	360	320	3
GF300/218-2	300	380	380	226	2
GF300/316-3	300	380	380	330	3
GF320/120-1	320	400	400	120	1
GF320/215-2	320	400	400	226	2
GF320/310-3	320	400	400	330	3
GF400/310-3	400	480	480	334	3
GF440/215-2	440	520	520	215	2
GF440/310-3	440	520	520	310	3
GF500/220-2	500	580	580	220	2
GF500/320-3	500	580	580	320	3
GF500/420-4	500	580	580	420	4
GF580/262-2	580	680	680	262	2
GF580/384-3	580	680	680	384	3